Vision Miner - NANO POLYMER ADHESIVE - 120ml
Vision Miner - NANO POLYMER ADHESIVE - 120ml
Couldn't load pickup availability
NANO POLYMER ADHESIVE
Say Goodbye to Warping
ZERO time scraping
More time printing
Designed for PEEK, ULTEM™, PPSU, and other high-performance FDM polymers, this build plate glue works for nearly every filament - Nylon, ABS, ASA, PLA, PETG, PEI, PSU, and almost every filament Vision Miner have tested.
- Designed for PEEK, PEI, and high-temp materials
- NO MESS like Glue Stick or Hair Spray - Better Grip
- Works on Many Surfaces (glass, carbon, resins, etc)
- Easy to clean and re-apply
- Works with normal-temp materials like ABS, PLA, and Nylon
- Made from safe, non-toxic, organic compounds
HOW TO APPLY
- Clean Glass (use water, windex, or alcohol)
- Apply Adhesive (spread evenly on Build Area)
- Calibrate your first layer height
- Print Your Part
- Remove part
HIGH TEMP
When you're extruding over 300ºC, remove the part as quickly as possible. You want the build plate and part to be HOT when you remove it -- high-temp materials contract extremely quickly when cooling, and parts can shatter glass in less than 30 seconds. This is why Vision Miner made thier carbon-fiber plates for high-temp materials
LOW TEMP
When you're extruding below 300ºC, generally you can remove the part as soon as the plate cools. With materials like PLA or PETG, it usually pops itself off the plate. If it sticks too much, you can apply water around the base of the part, which will help it release. Make sure your first layer is PERFECT -- if it is too close, even without adhesives, ABS & PETG will break and chip glass..
CAUTION when using ABS & PETG on Glass
Even without adhesives, ABS & PETG are well known to break and chip glass.




